TRFMC-3000 Series VHF/UHF Multicouplers

TRFMC-3000 Series VHF/UHF Multicouplers are broadband, high performance units coupling of 4 (or optionally 16) receivers to one of two switch selectable antennas. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.
  • Frequency range 20-3000MHz,
  • 2 antenna RF inputs ports and 4 (or optianally 16) RF output ports,
  • Surge and high ambient protection at each RF port,
  • Pre-amplifiers are ON/OFF remotely switchable at each input ports,
  • Unity gain and active gain options,
  • Dynamic or static IP setting,
  • MAC or IP address upgradable over RS232 port,
  • High output port to port isolation,
  • N type antenna input and SMA type RF output connectors,
  • 28VDC or 220VAC powering.

TRFMC-30 HF Multicouplers

TRFMC-30 Series HF Multicouplers are high performance units coupling 16 receivers to one of two switch selectable antennas. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by low noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.

  • Frequency range 1-30MHz,
  • 2 antenna RF inputs ports and 16 RF output ports,
  • Pre-amplifiers are ON/OFF remotely switchable at each input ports,
  • Unity gain and active gain options,
  • Dynamic or static IP setting,
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards,
  • MAC or IP address upgradable over RS232 port,
  • BNC type input and SMA type RF output connectors (or optionally all ports TNC type),
  • Surge and high ambient protection at each RF port.

TRFMC-6000-16-3 Multi-Band VHF/UHF Multicoupler

TRFMC-6000-16-3 is a latest generation high performance broadband VHF/UHF Multicoupler Unit that allows multiple banded antenna inputs to be switched to 16 wideband receivers for RF monitoring and analyses. Designed for compatibility with wide frequency range receiving systems. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by low noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.

  • Frequency range 20-6000MHz,
  • 3 Banded Antenna Inputs (1*20-550MHz, 1*450-3200MHz, 1*2800-6000MHz),
  • Pre-amplifiers are ON/OFF remotely switchable at each output and input ports,
  • Band selective filters to improve system performance,
  • High output port to port isolation
  • Dynamic or static IP setting,
  • MAC or IP address upgradable over RS232 port,
  • Surge and high ambient protection at each RF port,
  • TNC type RF connectors,
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

TRFMC-30-8-3 HF Multicoupler

TRFMC-30-8-3  is a high performance HF Multicoupler  Unit coupling 8 receivers to one of 3 switch selectable antennas. Switchable low-noise input amplifier provides wide dynamic range over the frequency range. Performance is characterized by low noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration, pre-amplifier activation, and DC supply at each antenna port.

Network capable Built-in-Test (BITE) option enables  continuous remote device monitoring of internal voltages,  antenna ports, internal operating temperatures.

Designed for harsh naval environments.

  • Frequency Range 2-30MHz,
  • 3 inputs for 2 active and one passive antenna, 8 outputs,
  • RF blanking  selectable on all RF output ports,
  • TNC type RF connectors,
  • High output port to port isolation,
  • Surge and high ambient protection at each RF port.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

TRFMC-6000-12-8 Multi-Band VHF/UHF Multicoupler

TRFMC-6000-12-8  is a latest generation high performance VHF/UHF Multicoupler Unit that allows 8 multiple banded antenna inputs to be switched to 12 wideband receivers for RF monitoring and analyses. Designed for compatibility with wide frequency range receiving systems. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by low noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.

Network capable Built-in-Test (BITE) option enables  continuous remote device monitoring of internal voltages,  antenna ports, internal operating temperatures.

Designed for harsh naval environments.

  • Frequency Range 20-6000MHz,
  • 8 Banded Antenna Inputs (2*0.1-0.55GHz, 2*0.08-2GHz, 2*0.030-1.3GHz, 2*2-6GHz), 12 outputs,
  • Band selective filters to improve system performance,
  • TNC type RF connectors,
  • High output port to port isolation,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

RFAB-30-512 VHF Multicoupler

RFAB-30-512 VHF Multicouplers are high performance units coupling 10 receivers to single antenna. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by ultra noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.

Network capable Built-in-Test (BITE) option enables  continuous monitoring of internal parameters.

  • Frequency range 30-512MHz,
  • Single RF inputs port and 10 RF output ports,
  • Different internal power divider configurations  controllable over TCP/IP,
  • N type RF connectors,
  • High output port to port isolation,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • Ultra low noise figure.
  • Optional band selective filters to improve system performance.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

RFAB-3000-0210 VHF/UHF Multicoupler

RFAB-3000-0210 VHF Multicouplers are high performance units coupling 10 receivers to any one of two antenna. Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by ultra noise figure, high intermodulation products suppression and port to port isolation. Remote control over TCP/IP enables switch matrix configuration and pre-amplifier activation at each antenna port.

Network capable Built-in-Test (BITE) option enables  continuous monitoring of internal parameters.

  • Frequency range 500-3000MHz,
  • 2 RF inputs port and 10 RF output ports,
  • Different internal power divider configurations  controllable over TCP/IP,
  • N type RF connectors,
  • High output port to port isolation,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • Ultra low noise figure.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

TRDB/TRBB Series Multicouplers

TRDB & TRBB are  active high performance distribution units coupling 8 receivers to a single  950-1450MHz port.  Switchable low-noise input amplifier provides wide dynamic range over the entire frequency range. Performance is characterized by ultra noise figure, high intermodulation products suppression and port to port isolation.

  • Frequency range 950-1450 MHz,
  • 1 to 8 distribution and 8 to 1 combiner,
  • Multitasking available at each individual 8 output connectors,
  • SMA type RF connectors,
  • High output port to port isolation,
  • Pre-amplifiers are ON/OFF remotely switchable at each  ports,
  • Band selective filters to improve system performance,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • Very low noise figure.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

TRDF-30-16-8  HF Switch Matrix

TRDF-30-16-8 is a multi-purpose RF routing device customized for DF (Directional Finding ) Systems, operating in 1-30MHz frequency range with 16 antenna inputs ports and 8 output ports in blocking RF switch matrix configuration.

8 input ports are dedicated to crossed-loop antennas. Power supply   (12VDC) and control signals are generated to each crossed-loop antenna by  8 MIL-DTL-38999 compliant circular connectors.

Customized ruggedized housing fully complies to MIL-STD-810G Environmental standards.

Network capable Built-in-Test (BITE) option enables  continuous remote device monitoring of internal voltages,  antenna ports, internal operating temperatures.

  • Frequency range 1-30 MHz,
  • 16 antenna inputs to 8 outputs ports switching,
  • Separate RF input port for Calibration Signal,
  • TNC type RF connectors,
  • High output port to port isolation,
  • Pre-amplifiers are ON/OFF remotely switchable at each  ports,
  • Typical gain 20dB on active mode,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • Immune to strong interference, designed for use in close proximity to transmitters.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

TRDF-30-8-8  HF Signal Router

TRDF-30-8-8 is a multi-purpose RF routing device customized for DF (Directional Finding ) Systems, operating in 1-30MHz frequency range with 8 antenna inputs ports and 8 output ports.

A Separate calibration signal  switched to 8 RF output port.

Power supply   (12VDC) and control signals are generated to each crossed-loop antenna by  8 MIL-DTL-38999 compliant circular connectors.

Network capable Built-in-Test (BITE) option enables  continuous remote device monitoring of internal voltages,  antenna ports, internal operating temperatures.

Customized ruggedized housing fully complies to MIL-STD-810G Environmental standards.

Designed for harsh naval environments.

  • Frequency range 2-30 MHz,
  • 8 antenna inputs and 8 outputs ports,
  • Separate RF input port for Calibration Signal,
  • Typical gain 20dB on active mode,
  • High output port to port isolation,
  • Pre-amplifiers are ON/OFF remotely switchable at each  ports,
  • Band pass filters for high selectivity,
  • Surge and high ambient protection at each RF port.
  • MAC or IP  address upgradable over RS232 port.
  • DC  and control signal supply to  crossed-loop antenna ports.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.
  • Space saving 19-inch EIA housing provides ultimate EMI shielding.

TRDF-6000-7-28 VHF/UHF Multi-Band Signal Router

TRDF-6000-7-28 is a high performance  RF routing device customized for DF (Directional Finding ) Systems, operating in 30-6000MHz  frequency range with 28 antenna inputs ports and 7 output ports.

A Separate calibration signal  switched to 7  RF output port.

Customized ruggedized housing fully complies to MIL-STD-810G Environmental standards.

Designed for harsh naval environments.

  • Frequency Range 30-6000MHz,
  • 28 antenna inputs and 8 outputs ports,
  • Separate RF input port for Calibration Signal,
  • High output port to port isolation,
  • Pre-amplifiers are ON/OFF remotely switchable at each  ports,
  • Band pass  and band stop filters for high selectivity,
  • Surge and high ambient protection at each RF port.
  • RF blanking at each antenna port.
  • Immune to strong interference, designed for use in close proximity to transmitters.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

TRDF-6000-29-22 VHF/UHF Signal Router

TRDF-6000-29-22 is a high performance  RF routing device customized for DF (Directional Finding ) Systems, operating in 1-6000MHz  frequency range with 29 antenna inputs ports and 8 output ports.

A Separate calibration signal  switched to 22 RF output port.

Customized ruggedized housing fully complies to MIL-STD-810G Environmental standards.

Designed and qualified for airborne applications.

  • Frequency range 1-6000 MHz,
  • 28 antenna inputs and 8 outputs ports,
  • Separate RF input port for Calibration Signal,
  • High output port to port isolation,
  • Pre-amplifiers are ON/OFF remotely switchable at each  ports,
  • Band pass  and band stop filters for high selectivity,
  • Surge and high ambient protection at each RF port.
  • RF blanking at each antenna port.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

TRDFMob-3000-12-2  VHF/UHF RF Switch

A  key component for land mobile Direction Finding (DF) systems. This high performance unit, operates within 20-3000MHz band  with 12 inputs and 2 outputs in RF blocking switch matrix topology. Customized compact and rugged housing optimized for mobile use under very harsh environmental conditions.

  • Frequency range 20-3000 MHz,
  • 12 inputs, 2 outputs blocking switch matrix with 3 separate Calibration inputs,
  • Internal RF amplifiers switchable, active and passive modes per each channel selectable,
  • Gain per channel controllable within –21dB to +18dB range,
  • Calibration signal 8dB nominal gain in 500Hz and unity gain at 3GHz,
  • Compact housing (20*10*8cm),
  • Surge and high ambient protection at each RF port.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

TRDFAero-3000-16-6  VHF/UHF RF Switch

TRDFAero-3000-16-6 is a latest generation high performance broadband VHF/UHF RF Switch customized for directional finding (DF) and RF Monitoring applications in a single rugged 3/8 ATR Rack housing for airborne platforms.

  • Frequency range 20-3000 MHz,
  • 16 RF inputs and 6 RF outputs,
  • 14 RF inputs and 4 RF outputs with blocking switch matrix configuration dedicated to DF channels, and 2 separate RF inputs and 2 RF outputs are dedicated to RF monitoring applications,
  • Max 14dB gain on DF channels on active mode,
  • Multiband inputs, 30-500MHz and 500-3000MHz for ultimate selectivity,
  • Max. 16dB gain on Monitoring channels on active mode,
  • Surge and high ambient protection at each RF port.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

SGÜB-/SÜGB Series  Multicouplers

SGÜB & SÜGB are  active high performance RF power distribution & power combainer units coupling 5&4receivers to a single  1-30MHz port and 30—3000 MHz port. Performance is characterized by ultra noise figure, high intermodulation products suppression and port to port isolation.

  • Frequency range 30—3000 MHz and 1—30 MHz ,
  • High output port to port isolation,
  • MAC or IP  address upgradable over RS232 port,
  • N and TNC type RF connectors,
  • Surge and high ambient protection at each RF port.
  • Full compliance to MIL-STD-461E Electromagnetic Compatibility & MIL-STD-810G Environmental Standards.

Antenna Amplifier

TRAK-3000-2-2 is an mast antenna amplifier operation in 20-3000MHz frequency range. DC supply for single active antenna. N type  RF connectors, professional compact housing provides ultimate EMI shielding.

Customized ruggedized housing fully complies to MIL-STD-810G Environmental standards.

  • Frequency range 20—3000 MHz,
  • 2 RF inputs for passive and active antenna and 2 outputs ports,
  • 27dB  gain on passive antenna port and 12dB gain on active antenna port,
  • N RF connectors,