CATV Distribution

Multi Band Amplifiers

MA302

MA 302 Multiband Amplifier provides thecombination of Satellite Master Antenna TV (SMATV)channels and Terresterial broadcasting (UHF) indistribution systems with its 2 different inputs: UHFand VHF+S-Band. VHF+S-Band input operatesbetween channels E02-S38 and it can be used atthe output of SMATV Headend or for BIII terresterial(VHF) channels. Through highly isolated outputsand gain controls, different signal level broadcastingscan be combined with well-balance.
  • Selective inputs; 1*UHF(E21-69) +1*VHF+S.band(E2-S38),
  • 12 Vdc remote pre-amplifier feed at UHF input,
  • High isolation between inputs,
  • Die cast aluminium housing, maximum RFI shielding,
2 Giriş
UHF
VHF
30 dB

MA303

MA 303 Multiband Amplifier provides efficientcombination of terresterial broadcastings fromdifferent directions and their distribution in smalland medium scaled distribution systems, throughits 2 UHF inputs with 30 dB gain and additionalVHFIII input.
  • Antenna inputs in 2 different operating band (BIII, UHF)
  • 12 Vdc remote pre-amplifier feed at UHF input,
  • High isolation between inputs,
  • Die cast aluminium housing, maximum RFI shielding,
3 Inputs
2xUHF
VHF
30 dB

MA404

MA 404 Multiband Amplifier provides efficient combination of terresterial broadcastings from differentdirections and their distribution in medium or larger scaled distribution systems, through its 2 UHF inputswith 30 dB gain and additional VHFIII and BI/FM inputs.
  • Antenna input option in 3 different operating bands (UHF, BIII, BI/FM).
  • 12 Vdc remote pre-amplifier feed at UHF input,
  • High isolation between inputs,
  • Die cast aluminium housing, maximum RFI shielding,
4 Input
2xUHF
VHF
40 dB

MA465

MA 465 Multiband Amplifier provides efficient combination of both analog and digital terresterialbroadcastings from different directions and their distribution in medium or larger scaled distribution systems,through its 3 different UHF inputs with 46 dB gain and additional VHFIII input. It is designed and manufacturedby using GaAsFET technology for Digital Terresterial (DVB-T) broadcastings.
  • 5 antennas input option in 3 different (UHF, BIII/BI and FM)operating bands.,
  • 12 Vdc remote pre-amplifier feed at UHF input,
  • High isolation between inputs,
  • Die cast aluminium housing, maximum RFI shielding,
5 Input
2xUHF
VHF
46 dB

Ultra Broadband Amplifiers

Ürün Sayfası
Kullanım Kılavuzu
CE Belgesi
Koaksiyel Dağıtım Ürün Kataloğu

 

UBA4234R

UBA Series Ultra Broadband Distribution Amplifiers are developed for distribution systems with combined SAT-IF (950-2150MHz) and CATV (5-862MHz) signals over signal coaxial cable. Low noise MMIC technology implemented in the IF(950-2150MHz) frequency range provides low distortions. Die cast metal housing provided excellent RFI shielding.
  • Combined SAT-IF / CATV Amplifier developed for ultra broadband distribution networks,
  • Splitband technology, 5-862 / 950-2150MHz,
  • SAT-IF gain : tilted 33…38dB, CATV gain 33dB, push pull,
  • Flexible return path diplex filters, active or passive options,
  • Diecast aluminium housing for heat dissipation and maximum RFI shielding.
IF
RF
2 GHz
IP54

FX Series CATV Indoor Amplifiers

FX3135AR

FX-3 Series CATV Amplifier specifically designed for the requirements of the growing MDU market with a very compact wall mounting housing.AGC function (optional) and very low power consumption combine to provide a reduced network operational costs. FX-3 has advanced GaAs e-pHEMT push pull technology with 1GHz bandwidth.
  • GaAs E-pHEMT Push Pull design for high output levels with low distortions and very high efficiency,
  • Automatic gain control (AGC),
  • Mid-stage equalizer with internal jumpers switchable to 0dB or 8dB,
  • Maximum RFI Shielding,
  • External input and output bi-directional test points,
  • SCTE compliant F type connectors.
GaAs
1 GHz
AGC
IP54

FX2134R

FX-2 Series CATV Distribution Amplifiers with active return are broadband indoor push pull distribution amplifiers designed for RF distribution systems such as those in Cable Television Apartments, Hotels, Hospitals and other applications where a high quality low noise figure amplifier is necessary to amplify the signals in both the forward and return paths.Designed with flat operational gain of 34 dB in the forward bandwidth and 17 dB in the reverse bandwidth. They have an input variable equalizer in the forward bandwidth for balancing, a forward 20 dB input gain control and a 20 dB output reverse gain controls.The amplifiers are self powered , (90-240VAC).
  • Push Pull output stage for high output levels with low distortions,
  • Input gain and equalization controls,
  • Die cast aluminum housing for heat dissipation,
  • Maximum RFI Shielding,
  • External input and output bi-directional test points,
  • 90-240VAC universal powering.

Push Pull
1 GHz
IP54
SMPS

FX1130

FX-1 Series is designed for installation in broadband CATV in-house distribution networks up to 862MHz. Recommended for single direction, small to medium size distribution systems.

Designed with flat operational gain of 30 dB. They have an input variable equalizer for balancing and a 20 dB input gain control.

The amplifiers are self powered , (90-253VAC).

  • High and stable output level.,
  • Low noise figure,
  • Gain and equalization controls,
  • Die cast aluminum housing (IP54) provides high screening and high durability against external conditions.
  • 90-253VAC universal powering.
Si Bipolar
862 MHz
IP54
SMPS

CATV Line and Headend Amplifiers

PA-X41128RLQ

Ürün Sayfası
Kullanım Kılavuzu
CE Belgesi
Koaksiyel Dağıtım Ürün Kataloğu

PA-X 41128R

PA-X 41128R CATV Distribution Amplifiers with active return arebroadband indoor GaAsFET Push Pull, high output level distributionamplifiers designed for RF distribution systems such as those inCable Television Apartments, Hotels, Hospitals and other applicationswhere a high quality low noise figure amplifier is necessary to amplifythe signals in both the forward and return paths.Designed with flat operational gain of 41 dB in the forward band and18 dB in the reverse band. The PA-X41128R has sockets for JXPstyle plug-in controls, including input pad and equalizer and interstageequalizer for forward bandwidth for balancing, and input pad plusoutput pad and equalizer for reverse path balancing.The amplifiers are self powered and compatible with 117 and 230Vsystems.
  • GaAs RFIC Push Pull for high outputlevels with lowdistortions,
  • JXP style plug-incontrols,
  • Surge protection onall ports,
  • Diecast aluminumhousing for heatdissipation,
  • 90-240 VAC powering.
GaAs
1 GHz
41 dB
IP54

 

Ürün Sayfası
Kullanım Kılavuzu
CE Belgesi
Koaksiyel Dağıtım Ürün Kataloğu

TLE 35128

TLE 35128 CATV Outdoor Line Extender is a broadband amplifier on surface or underground paths of hugescale CATV networks, which is able to be fed from coaxial network. TLE 35128 features ultra high level outputand minimal noise with its GaAs Hybrid Power Doubler technology and it can be cascaded by several unitsthrough this feature. Its mechanical and electrical characteristics are developed according to North AmericanCable TV Standards (SCTE).
  • Active distribution element for huge scale, two way interactive CATV HFC networks.
  • AC bypass conduction feature for cascaded applications,
  • Highly efficient, minimum distortion at high output level through GaAs Hybrid Power Doubler technology,
  • Metal injection diecast housing belongs to IP65 category: High durability under rain, pressure, dust etc,
  • 30-90 VAC feed from coaxial network selectable from input or output
GaAs
870 MHz
AC Pass
IP65

 

Ürün Sayfası
Kullanım Kılavuzu
CE Belgesi
Koaksiyel Dağıtım Ürün Kataloğu

PA Series

PA Series CATV Distribution Amplifiers with active and passive return pathoptions are broadband indoor GaAs-Fet / PushPull distribution amplifiersdesigned for RF distribution systems such as those in Cable TelevisionApartments, Hotels, Hospitals and other applications where a high quality lownoise figure amplifier is necessary to amplify the signals in both the forwardand return paths.These are all designed with flat operational gain of 35 dB in the forwardbandwidth and 18 dB in the reverse bandwidth. They have an input equalizerin the forward bandwidth for balancing , a forward 20 dB gain control and a 20dB reverse gain control.The amplifiers are self powered and available in either 117 or 230 volt.
  • GaAs-Fet Push Pull for high output levels with low distortions,
  • Active reverse bandwidth options,
  • Diecast aluminium housing for excellent heat dissipation,
  • Surge protection of 6kV on all ports,
  • 230 VAC powering.
GaAs
1 GHz
35 dB
IP54

CATV Optical Nodes

ONU50

ONU 50 CATV Indoor Optical Transceiver is an Optical/RF converter and distribution amplifier for useat the entry points of multi-dwelling units, within CATV networks whose optical fiber lines are extended tothe building entrances (FTTB/HFC). It converts forward direction (downstream) optical signals transmittedover fiber line to RF for the coaxial network inside the building; and it converts reverse direction (upstream)RF signals generated by modem devices used for interactive applications to optical signals.
  • High RF output level through GaAsFET Push Pull amplifier stages,
  • Compliant with advanced CATV applications through 1 GHz forward bandwidth,
  • Microprocessor aided AGC (automatic gain control),
  • Fabry-Perot or DFB laser options for reverse direction,
  • Compatible with all mains powering conditions through 90-240 VAC SMPS power suppy.
1 GHz
AGC
Alıcı
Verici

ONIX-44-2G

ONIX-44-2G is a receive only indoor optical node specifically designed for the direct transmission of ultra broadband RF/IF signals in FTTX, PON, MDU applications. It offers pretty high output level and consumes very low power which leads to reduced operational cost.
  • Receive only indoor optical node for CATV and SATV applications,
  • Full forward bandwidth up to 2.15GHz,
  • High RF output range; 44dBmV (CATV) and 56dBmV (SATV),
  • GaAs E-pHEMT push-pull technology for high and stable output level with very low power consumption,
  • Diecast aluminum housing for excellent heat dissipation and RFI shielding.
RF+IF
2 GHz
Dijital
Analog

ONIX-40-1G

ONIX-40- 1G Indoor Optical Receiver, is an Optical/RF converter and distribution amplifier for use at theentry points of multi-dwelling units, within CATV networks whose optical fiber lines are extended to thebuilding entrances (FTTB/HFC). It converts forward direction (downstream) optical signals transmittedover fiber line to RF for the coaxial network inside the building.
  • High RF output level through GaAs E-pHEMT Push Pull amplifier stages,
  • Full forward bandwidth up to 1 GHz,
  • Automatic Gain Control (AGC),
  • High screening and resistance against environmental conditons in alumnum diecast housing (IP54),
  • Compatible with all mains powering conditions through 90-240 VAC SMPS power supply.
1 GHz
AGC
Dijital
Analog