ONU50S

ONU50S is a DOCSIS 3.1 compliant high output two way indoor optical fiber node for CATV, SMATV, FTTx, MDU or private business applications. ONU50S  has a wide optical input range from 1200 to 1600nm, making it ideal for either 1310nm and 1550nm systems. Downstream section has a microprocessor controlled AGC feature which enables tracking input optical level to maintain constant RF output level.
  • High RF output level through GaAsFET Push Pull amplifier stages,
  • Compliant with advanced CATV applications through 1.2 GHz forward bandwidth,
  • Microprocessor aided AGC (automatic gain control),
  • Fabry-Perot or DFB laser options for reverse direction,
  • Compatible with all mains powering conditions through 90-240 VAC SMPS power suppy.
1.2 GHz
AGC
CWDM
DFB

ONU50D

ONU 50D CATV Indoor Optical Node (Transceiver) is Optical/RF converter and distribution amplifier for use at the entry points of multi-dwelling units, within CATV networks whose optical fiber lines are extended to the building entrances (FTTB/HFC). It converts forward direction (downstream) optical signals transmitted over fiber line to RF for the coaxial network inside the building; and it converts reverse direction (upstream) RF  signals  generated  by  modem  devices  used  for  interactive  applications  to  optical  signals.
  • High RF output level through GaAsFET Push Pull amplifier stages,
  • Compliant with advanced CATV applications through 1.2 GHz forward bandwidth,
  • Microprocessor aided AGC (automatic gain control),
  • Fabry-Perot or DFB laser options for reverse direction,
  • Compatible with all mains powering conditions through 90-240 VAC SMPS power suppy.
1.2 GHz
AGC
CWDM
DFB

ONIX-44-2G

ONIX-44-2G is a receive only indoor optical node specifically designed for the direct transmission of ultra broadband RF/IF signals in FTTX, PON, MDU applications. It offers pretty high output level and consumes very low power which leads to reduced operational cost.
  • Receive only indoor optical node for CATV and SATV applications,
  • Full forward bandwidth up to 2.15GHz,
  • High RF output range; 44dBmV (CATV) and 56dBmV (SATV),
  • GaAs E-pHEMT push-pull technology for high and stable output level with very low power consumption,
  • Diecast aluminum housing for excellent heat dissipation and RFI shielding.
RF+IF
2 GHz
Digital
Analog

ONIX-40-1G

ONIX-40- 1G Indoor Optical Receiver, is an Optical/RF converter and distribution amplifier for use at the entry points of multi-dwelling units, within CATV networks whose optical fiber lines are extended to the building entrances (FTTB/HFC). It converts forward direction (downstream) optical signals transmitted over fiber line to RF for the coaxial network inside the building.
  • High RF output level through GaAs E-pHEMT Push Pull amplifier stages,
  • Full forward bandwidth up to 1 GHz,
  • Automatic Gain Control (AGC),
  • High screening and resistance against environmental conditons in alumnum diecast housing (IP54),
  • Compatible with all mains powering conditions through 90-240 VAC SMPS power supply.
1 GHz
AGC
Digital
Analog